Geotone S wood ceiling system is one of the most popular product lines in the Geometrik product lineup. Our team has pushed the limit on improving the production process and efficiency capability in producing this high-quality ceiling system. The value of Geotone S is in installation options, high acoustical performance and affordability.
The Geotone S comes in three diverse premanufactured face groove profiles with varying spacing and acoustical performance. The panels can be manufactured in different forms including tongue and groove planks, ceiling tiles and custom panels for ceilings and walls.
The acoustical performance of Geotone S can be further enhanced through application of denser and thicker acoustical insulation which can be field applied by a contractor to the rear of the panel. We invite you to reach out to your local Geometrik representative to learn more about the advantages of Geotone S and how it can enhance your project in acoustics and design.
The Geotone S T & G Plank System is most suitable for applications where a monolithic look is desired. The seamless nature of T & G connection allows for complete coverage of large surfaces without visible panel reveals.
Both the Geotone S wall and ceiling planks are installed using special Geometrik T & G clips, and can be installed with the grooves running vertically or horizontally. The product can be installed with additional insulation to further enhance acoustical properties.
Geotone S Custom Size Panels are available in a variety of sizes and can be factory cut to any customer length or width up to 4’ wide and 10’ long. These wall panels can be installed on both Ceiling and Walls. Ceiling installation is possible using Z Hanger or Torsion Springs. Wall installations are achieved through use of Z clips. and a minimum ¼” reveal between panels is recommended to allow for the wood’s natural expansions and contractions.
Geotone S Ceiling Tiles are supplied in four standard sizes: 2’ x 2’, 2’ x 4’, 2’ x 8’ and 2’ x 10’. These panels are easily suspended from standard 15/16 Black Heavy Duty T-Bar, and are available in three edge treatments: Lay-In, Tegular Edge and Side Groove.
GT 1000 S
GT 1700 S
GT 3400 S
MR 4: Recycled content
MR 5: Locally manufactured & harvested materials
MR 6: Rapidly Renewable Materials
MR 7: FSC Chain of Custody Certification
EQ 4.2: Low VOC Finishes
EQ 4.4: Composite panels: No Added Urea Formaldehyde
* Must be specified prior to tender and ordering.
Ceiling and Walls
Auditoriums & Conference Rooms
Banks & Executive Boardrooms
Schools, Colleges, Universities
Large Open Office Spaces
|Thickness||5/8", 11/16", 3/4"|
|Size||Manufacturer standard and custom|
|Face||2 mm wide groove|
|Profile||GT1000S, GT1700S, GT3400S|
|Coating||20 sheen clear low VOC|
|Backer||non-woven acoustic fabric|
|Options||Solid or Wood Veneer|
Panels: Edge Banded
Ceiling Tile: Lay-in, Tegular Edge, Side Groove
|Custom stain||to match architect’s sample|
|Fire Treatment||Class A (available upon request)|
|Panel weight||approx. 2 lbs/SF|
|Finish||Large variety of veneers|
Geometrik is committed to putting every effort into preserving our forest for future generations. We actively promote panels made of engineered wood that are environmentally friendly, easy to recycle, made of recycled fiber and have a low impact on the environment. Geometrik offers wood ceiling and wall panels that are manufactured using environmentally preferable products (EPP), such as low emitting sustainable fiberboard (SDF) that contains pre-consumer and/or post-consumer recycled fiber and has no added urea formaldehyde. As well, Geometrik uses low VOC finishes to contribute to sustainable design.